-
Accelerating Regulatory Test Simulation with LS- DYNA through Process Guidance Technology
With the strength in implementing best practices process guidance technology has proven dramatically reduced lead times in pre and post processing while ...
Located in
Conferences
/
5th European LS-DYNA Conference
-
Accurate and efficient dummy models for occupant safety design
Located in
Conferences
/
6th European LS-DYNA Conference
-
An Integrated Process for Occupant Safety Simulations with LS-DYNA & MADYMO Coupling
This paper presents an innovative integrated process to perform occupant safety simulation with LS-Dyna & Madymo coupling. More than ever before, the ...
Located in
Conferences
/
11th International LS-DYNA Conference
-
AN LS-DYNA USER DEFINED MATERIAL MODEL FOR LOOSELY WOVEN FABRIC WITH NON-ORTHOGONAL VARYING WEFT AND WARP ANGLE
The behavior of loosely woven fabrics (LWF) differs significantly from other types of woven fabric materials, the major difference being the significant change ...
Located in
Conferences
/
7th International LS-DYNA Conference
-
Application of LS-DYNA and MADYMO Coupled Model for Simulating an Offset Frontal Crash Scenario
A full vehicle finite element model of the 1995 Chevrolet Lumina validated in full frontal impact was used to simulate a frontal offset impact. The tibia index ...
Located in
Conferences
/
6th International LS-DYNA Conference
-
Application of MADYMO Occupant Models in LS-DYNA/MADYMO Coupling
The LS-DYNA – MADYMO coupling has been extended so that users gain maximal flexibility in their choice of software and models. Where the traditional coupling ...
Located in
Conferences
/
4th European LS-DYNA Conference
-
ASPECTS OF SEAT BELT MATERIAL SIMULATION
The so-called D-ring dynamic overturning is an instability phenomenon occurring occasionally during car crashes. It can have a negative effect to the restraint ...
Located in
Conferences
/
3rd European LS-DYNA Conference
-
Benchmark Study on the AIRBAG_PARTICLE Method for Out-Of-Position Applications
The demands for developing safety restraint systems that perform well under Out-Of-Position (OOP) conditions have increased significantly in recent years. At ...
Located in
Conferences
/
10th International LS-DYNA Conference
-
CAE Analysis of Passenger Airbag Bursting through Instrumental Panel Based on Corpuscular Particle Method
The safety regulation requires that passenger airbag (PAB) to deploy into working position in time without causing any fragmentation of its surrounding ...
Located in
Conferences
/
10th European LS-DYNA Conference
/
5 Occupant Safety I - Airbags
-
Characterisation of an Energy Absorbing Foam for Motorcycle Rider Protection in LS-DYNA
A study on traffic fatalities [1] shows that the most frequent causes of motorcyclists’ deaths in accidents are multiple skeletal and visceral injuries. Brain ...
Located in
Conferences
/
13th European LS-DYNA Conference 2021
/
Crash