-
Implementation of MCEER TR 14-0006 Blast Load Curves in LS-DYNA® and Benchmark to Commonly Practiced Blast Loading Application Methods
A tool has been developed to explore implementation of the blast load curves derived by J. Shin, A. Whittaker, A. Aref and D. Cormie in the MCEER Technical ...
Located in
Conferences
/
15th International LS-DYNA Conference
/
Blast
-
Effect of Explosive Charge Geometry on Boundary Surface Peak Pressure with Regard to Standoff Distance
In an effort to better understand the effect of explosive charge geometry on blast effects, in particular with regard to standoff distance, this paper presents ...
Located in
Conferences
/
15th International LS-DYNA Conference
/
Blast
-
Jones-Wilkens-Lee (JWL) Equation of State with Afterburning
The standard Jones-Wilkens-Lee equation-of-state for modeling detonation of high explosives was modified to allow inclusion of the additional energy associated ...
Located in
Conferences
/
14th International LS-DYNA Conference
/
ConstitutiveModeling
-
Chemically Reactive Flows in Airbag Inflator Chambers
Airbags are part of an important vehicle safety system, and the inflator is an essential part that generates a specific volume of gas to the airbag for a short ...
Located in
Conferences
/
10th European LS-DYNA Conference
/
11 Developer III - Multiphysics
-
LS-DYNA ALE Nodal Coupling
LS-DYNA ALE solver has been used extensively on modeling fluid and gas behaviors. The accompanying FSI solver has been successfully applied on series of ...
Located in
Conferences
/
12th International LS-DYNA Conference
-
Three Dimensional Analysis of Induced Detonation of Cased Explosive
Fragments of aluminum impacting on Composition B explosive encased in rolled homogenous armour (RHA) steel were investigated through the LS-DYNA®. The ...
Located in
Conferences
/
13th International LS-DYNA Conference
/
Blast
-
Impact and Detonation of COMP-B: An Example using the LS-DYNA EOS: Ignition and Growth of Reaction in High Explosives
The LS-DYNA keyword *EOS_IGNITION_AND_GROWTH_OF_REACTION_IN_HE provides the ability to model the ignition and growth of the reaction in high explosives via ...
Located in
Conferences
/
12th International LS-DYNA Conference
-
Analysis of Partially Confined Blast Experiments and Simulations
Data and simulation results presented by Teland et al. (2018) for incident and reflected pressure histories indicated the simulation results time of arrival ...
Located in
Conferences
/
13th European LS-DYNA Conference 2021
/
Impact/Blast
-
Blast Detonated by Impact Simulation
The purpose of this study is to present parameters required for blast detonated by impact simulation in LS-DYNA with comprehensive approach and compare with ...
Located in
Conferences
/
12th European LS-DYNA Conference
/
High Speed Impact
-
SHIP STRUCTURES SUBJECT TO HIGH EXPLOSIVE DETONATION
Predicting the structural response of a naval vessel to a high explosive detonation is an important requirement in naval shipbuilding. Unfortunately, current ...
Located in
Conferences
/
7th International LS-DYNA Conference