Blast Detonated by Impact Simulation
The purpose of this study is to present parameters required for blast detonated by impact simulation in LS-DYNA with comprehensive approach and compare with AUTODYN results. Blast detonated by impact is a widely used method for controlled blast. However, design of the problem is more likely limited to simulation results. For a proper and reliable simulation, it has to be taken care of reacted and unreacted state parameters of detonative product, mesh size and method.
https://www.dynalook.com/conferences/12th-european-ls-dyna-conference-2019/high-speed-impact/balaban_fe-tech.pdf/view
https://www.dynalook.com/@@site-logo/DYNAlook-Logo480x80.png
Blast Detonated by Impact Simulation
The purpose of this study is to present parameters required for blast detonated by impact simulation in LS-DYNA with comprehensive approach and compare with AUTODYN results. Blast detonated by impact is a widely used method for controlled blast. However, design of the problem is more likely limited to simulation results. For a proper and reliable simulation, it has to be taken care of reacted and unreacted state parameters of detonative product, mesh size and method.
Balaban_FE-TECH.pdf
— 4.7 MB