-
Simulation of Circular Sawing Proccesses
Spanende Prozesse sind durch sehr hohe Dynamik und Verformungszuständen gekennzeichnet. Mit Hilfe der Simulationstechnologie sind bereits verschiedene ...
Located in
Conferences
/
10th European LS-DYNA Conference
/
3 Process IX - Cutting-Model Reduction
-
A Computational and Experimental Analysis of Ballistic Impact to Sheet Metal Aircraft Structures
The ballistic resistance of 2024-T3 and 2024-T351 alloy aluminum flat plates to aircraft engine fragments is evaluated experimentally. Gas and powder gun tests ...
Located in
Conferences
/
5th European LS-DYNA Conference
-
Modelling of Adhesively Bonded Joints with *MAT252 and *MAT_ADD_COHESIVE for Practical Applications
Located in
Conferences
/
10th European LS-DYNA Conference
/
2 Crash III - Connection
-
A new constitutive model for nitrogen austenitic stainless steel
Quasi-static, quasi-dynamic and dynamic compression tests have been performed on a nitrogen alloyed austenitic stainless steel. This alloy achieves a high ...
Located in
Conferences
/
4th European LS-DYNA Conference
-
Three Dimensional Analysis of Induced Detonation of Cased Explosive
Fragments of aluminum impacting on Composition B explosive encased in rolled homogenous armour (RHA) steel were investigated through the LS-DYNA®. The ...
Located in
Conferences
/
13th International LS-DYNA Conference
/
Blast
-
The Relation between Initial Yaw and Long Rod Projectile Shape after Penetrating an Oblique Thin plate
The effect of yaw on the ability of an eroding long rod projectile to penetrate oblique thin targets was investigated. Numerical simulations of an eroding long ...
Located in
Conferences
/
4th European LS-DYNA Conference
-
Numerical simulation of spiral-strand cables subjected to high velocity fragment impact
This paper presents the results of a numerical study carried out to evaluate the response of high-strength steel spiral-strand cables, when subjected to high ...
Located in
Conferences
/
8th European LS-DYNA Conference
/
Session 18
-
High Velocity Impact Response of High Strength Aluminum using LS DYNA
Experimental and numerical studies were conducted to determine the impact response for high strength aluminum armor. A series of ballistic impact tests were ...
Located in
Conferences
/
12th European LS-DYNA Conference
/
High Speed Impact
-
Simulation of the Electromagnetic Flux Compression using LS-DYNA Multi-Physics Capability
The Electro-Magnetic Flux Compression system can generate ultra-high magnetic flux over 700 T with an electromagnetically imploded coil and is employedto study ...
Located in
Conferences
/
10th European LS-DYNA Conference
/
7 Simulation I - Multiphysics
-
Validation of Mine Blast Simulations with Field Tests
In this work, LS-DYNA® simulation results of mine blast of flat aluminum/steel plates and validation studies using mine blast tests are presented. The buried ...
Located in
Conferences
/
9th European LS-DYNA Conference