Simulating Dynamic Loads on Concrete Components using the MM-ALE (Eulerian) Solver
A 3-stage loading on a reinforced concrete beam-column involving pre-load, blast and post-blast compression to failure was analyzed with the S-ALE solver. This paper presents the findings from the simulation and the results were compared to full-scale blast trials of reinforced concrete beam-column test specimens.
https://www.dynalook.com/conferences/11th-european-ls-dyna-conference/concrete-under-blast-load/simulating-dynamic-loads-on-concrete-components-using-the-mm-ale-eulerian-solver/view
https://www.dynalook.com/@@site-logo/DYNAlook-Logo480x80.png
Simulating Dynamic Loads on Concrete Components using the MM-ALE (Eulerian) Solver
A 3-stage loading on a reinforced concrete beam-column involving pre-load, blast and post-blast compression to failure was analyzed with the S-ALE solver. This paper presents the findings from the simulation and the results were compared to full-scale blast trials of reinforced concrete beam-column test specimens.
04_Poon_Minstry_of_Home_Affairs.pdf
— 1.0 MB