-
Particle Blast Method (PBM) for the Simulation of Blast Loading
This paper presents a particle blast method (PBM) to describe blast loading. The PBM is an extension of corpuscular method (CPM), which is coarse-grained ...
Located in
Conferences
/
13th International LS-DYNA Conference
/
Blast
-
Overview of the CESE Compressible Fluid and FSI Solvers
The Original CESE solver in LS-DYNA® is a compressible fluid solver. Over time, more and more capabilities and applications have been added, especially coupled ...
Located in
Conferences
/
16th International LS-DYNA Conference
/
CESE T2-2
-
Using LS-DYNA MM-ALE capabilities to help design a wall mitigating accidental blast effects
A solution had to be found in order to protect buildings neighboring an industrial site from the blast effects of possible accidental explosions on the site. ...
Located in
Conferences
/
8th European LS-DYNA Conference
/
Session 15
-
Modern Field Code Cluster of Fluid Dynamics and Structure Mechanics with MetaComputing Grids for Safety and Environment Research Studies
In this this paper, we describe main results obtained within the scope of joint project activities concerning the numerical simulation of reacting flows in ...
Located in
Conferences
/
4th European LS-DYNA Conference
-
A Study of RC Beam-Column Against Close-in Blast Loading Using 3D ALE Mapping to S-ALE Technique
Mapping technique has been developed to allow the decomposition of a calculation in several steps. The transitions are allowed 1D to 2D/3D, 2D to 2D/3D, or 3D ...
Located in
Conferences
/
14th European LS-DYNA Conference 2023
/
Protective Structures
-
Retrofitting of Reinforced Concrete Beam-Column via Steel Jackets against Close-in Detonation
This paper presents results from simulation, in comparison to findings from full-scale blast trials of Reinforced Concrete Beam-Column test specimens. 2 ...
Located in
Conferences
/
12th International LS-DYNA Conference
-
Simulation of Concurrent Detonation of Multiple High Explosive Charges
A 1D spherical LS-DYNA Multi-Material Arbitrary Lagrange Eulerian (MM-ALE) model was constructed to simulate the three single charge events reported in MABS 25 ...
Located in
Conferences
/
12th European LS-DYNA Conference
/
High Speed Impact
-
The RHT concrete model in LS-DYNA
The RHT concrete model is implemented in LS-DYNA. It is a macro-scale material model that incorporates features that are necessary for a correct dynamic ...
Located in
Conferences
/
8th European LS-DYNA Conference
/
Session 12
-
Fluid-Structure Interaction involving Close-in Detonation Effects on Column using LBE MM-ALE Method
This paper shares the experiences gathered from studies conducted on the use of *Load_Blast_Enhanced (LBE) keyword to couple empirical blast loads to air ...
Located in
Conferences
/
9th European LS-DYNA Conference
-
Buried Charge Engineering Model: Verification And Validation
Livermore Software Technology Corporation (LSTC) recently added an empirically-based model for buried mine blast loading via the keyword *INITIAL_IMPULSE_MINE. ...
Located in
Conferences
/
9th European LS-DYNA Conference